[coyotos-dev] libsherpa, astmaker migration

[Jonathan S. Shapiro]

The astmaker and libsherpa tools have now migrated to ccs-xenv, which
means that they are now installed using RPM. If you are tracking the
coyotos repository with YUM, you should run an update and then do a

	make destructive-sync

and you should have no problems.


If you are running on a non-RPM system, you will need to install the
libsherpa and astmaker into your cross environment. If you have the
ccs-xenv tree, you *should* be able to rebuild the cross environment
with the usual process. This is not yet tested, and I would greatly
appreciate it if someone might report success or failure on this.

If that doesn't work, you can also pull the tarball from 

   http://www.eros-os.com/YUM/coyotos/tarballs/coytools-0.2.1-1-src.tgz

Unpack this and run:

	./configure --prefix=/coyotos/host

(where "/coyotos" should be replaced with wherever you stuck your cross
environment).

then:

	make install

shap
  
-- 
Jonathan S. Shapiro, Ph.D.
Managing Director
The EROS Group, LLC
+1 443 927 1719 x5100